Need help? Call us FREE on 0800 280 0416
Thumbnail 1

Kingston 4GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank

Quick Code: S/KVR13N9S8/4 | UPC: 0740617207620

£26.20
Includes FREE UK Delivery
GBP
26.20

We have 15 of these in stock.

4GB 1Rx8 512M x 64-Bit PC3-10600 CL9 240-Pin DIMM

ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers.
Features
JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
667MHz fCK for 1333Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with
starting address 000 only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration: Internal self calibration through ZQ
pin (RZQ : 240 ohm 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85C,
3.9us at 85C < TCASE < 95C
Asynchronous Reset
PCB: Height 0.740 (18.75mm), single sided component

    Description

    Specification

    • Series: Kingston ValueRAM
    • DDR Type: DDR3
    • Size: 1 x 4GB
    • Individual Module Size: 4GB
    • Total Capacity: 4GB Total
    • Speed: 1333 MHz
    • Compliance: PC3-10600
    • Pins: 240-pin
    • CAS Latency: CL9
    • Data Integrity Check: Non-ECC
    • Voltage: 1.5V
    • Heatsink: No
    • LED Lighting: No
    • Additional Information: Single rank
      Unbuffered
    • Package Type: Blister Pack
    • Package Weight: 0.0225 kg
    • Warranty: Lifetime
Blackmore IT

Specification


Close Clear All