Need help? Call us FREE on 0800 280 0416
Thumbnail 1

Kingston 4GB, DDR3, 1600MHz (PC3-12800), CL11, DIMM Memory, Single Rank

Quick Code: S/KVR16N11S8/4 | UPC: 740617207774

£27.10
Includes FREE UK Delivery
GBP
27.10

We have 12 of these in stock.

KVR16N11S8/4
4GB 1Rx8 512M x 64-Bit PC3-12800 CL11 240-Pin DIMM
ValueRAM's 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold
contact fingers.
Features
JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
800MHz fCK for 1600Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address 000 only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85C, 3.9us at 85C < TCASE < 95C
Asynchronous Reset
PCB : Height 0.740 (18.75mm), single sided component

    Description

    Specification

    • Series: Kingston ValueRAM
    • DDR Type: DDR3
    • Size: 1 x 4GB
    • Individual Module Size: 4GB
    • Total Capacity: 4GB Total
    • Speed: 1600 MHz
    • Compliance: PC3-12800
    • Pins: 240-pin
    • CAS Latency: CL11
    • Data Integrity Check: Non-ECC
    • Voltage: 1.5V
    • Heatsink: No
    • LED Lighting: No
    • Package Type: Blister Pack
    • Package Weight: 0.0225 kg
    • Warranty: Lifetime
Blackmore IT

Specification


Close Clear All